notice_e-01 notice for taiyo yuden products y please read this notice before using the taiyo yuden products. reminders product information in this catalog is as of october 2010. all of the contents speci?ed herein are subject to change with out notice due to technical improvements, etc. therefore, please check for the latest information carefully be - fore p r actical application or usage of the products. pl e ase note that taiyo yuden co., ltd. shall not be responsible for any defects in products or equipment incorpo - rat i ng such products, which are caused under the conditions other than those speci?ed in this catalog or individual spe c i?cation. please contact taiyo yuden co., ltd. for further details of product speci?cations as the individual speci?cation is ava i lable. please conduct validation and veri?cation of products in actual condition of mounting and operating environment befo r e commercial shipment of the equipment. a l l electronic components or functional modules listed in this catalog are developed, designed and intended for use i n general electronics equipment.(for av, office automation, household, office supply, information service, tel e communications, (s u ch as mobile phone or pc) etc.). before incorporating the components or devices into any equipment in the ?eld such as transportation,( automotive control, train control, ship control), transportation signal, dis a ster prevention, medical, public information network (telephone exchange, base station) etc. which may have dir e ct in?uence to harm or injure a human body, please contact taiyo yuden co., ltd. for more detail in advance. do n ot incorporate the products into any equipment in ?elds such as aerospace, aviation, nuclear control, subma - rin e s ystem, military, etc. where higher safety and reliability are especially required. in a ddition, even electronic components or functional modules that are used for the general electronic equipment, if t h e equipment or the electric circuit require high safety or reliability function or performances, a suf?cient reliabil - ity e valuation check for safety shall be performed before commercial shipment and moreover, due consideration to ins t all a protective circuit is strongly recommended at customer's design stage. t h e contents of this catalog are applicable to the products which are purchased from our sales of?ces or distribu - tor s ( so called ? tai y o yuden ? s of?cial sales channel ? ). it is only applicable to the products purchased from any of taiyo yuden ? s of? c ial sales channel. please note that taiyo yuden co., ltd. shall have no responsibility for any controversies or disputes that may oc - cur i n connection with a third party's intellectual property rights and other related rights arising from your usage of pro d ucts in this catalog. taiyo yuden co., ltd. grants no license for such rights. c a ution for export ce r tain items in this catalog may require speci?c procedures for export according to ? for e ign exchange and for - eign trade control law ? of j apan, ? u.s. export administration regulations ? , and other applicable regulations. should you have any question or inquiry on this matter, please contact our sales staff.
176 emi?lter01_e-01 features ordering code applications part numbers this catalog contains the typical speci?cation only due to the limitation of space. when you consider the purchase of our products, please check our speci?cation. for details of each product (characteristics graph, reliability information, precautions for use, and so on), see our web site (http://www.ty-top.com/) or cd catalogs. ? 2 1.25mm size emi ?lter unifying multilayer capacitor and inductor t series with rapid attenuation characteristics and tz series with effec - tive ma intaining of waveform quality of digital signal are lined up. ? sam e shape as multilayer capacitor which is suitable for high speed mount - ing by automatic machine. ? noise countermeasure in visual signal such as dvd, dsc, pdp, etc. (t ser ies) ? noi se countermeasure and maintaining waveform quality in digital sig n al processing circuit in personal computer, communication equip - ment, etc. (tz series) multilayer emi suppression filter t series ? type fk multilayer emi sup p ression fil t er ? cutoff frequency example 186 18 mhz 256 25 m hz ? packaging ` t tape & reel ? packaging t tape & reel ? characteristic example a sharp ? rated voltage v l 10 ? internal code standard products =blank space ? internal code standard products =blank space ? external dimensions (l w) mm 2 1 25 0805 2 . 0 1.25 ? equivalence circuit t t type ? equivalence circuit t t type f k 2 1 2 5 t 2 5 6 a l ` t ? ? ? ? ? ? ? ? t series tz series external dimensions /standard quan tity l w t e 1 e 2 standard quantity [pcs] embossed tape 2.0 0 . 2 1.25 0.2 1.0 0.2 0.3 0.2 0.4 0.2 3000 (0.079 0.008) (0.049 0.008) (0.039 0.008) (0.012 0.008) (0.016 0.008) unit : m m ( inch) ordering code ehs ( environmental hazardous substances ) cut-off fre q uency characteristic dc resistance max. rated voltage rated current insulation resistance insertion-loss [1mhz] attnuation 50mhz 100mhz 200mhz 350mhz 500mhz 600mhz 800mhz fk2125t186al rohs 18mhz 3.6mhz Q 1.0db R 20db R 20db ` ` R 20db ` ` 2 10v dc 100ma dc R 30m fk2125t256al rohs 25mhz 5mhz R 15db R 20db ` ` R 20db ` ` fk2125t406al rohs 40mhz 10mhz ` R 15db R 20db ` R 20db ` ` fk2125t107al rohs 100mhz 20mhz ` ` R 20db ` R 20db ` ` 3 fk2125t167al rohs 160mhz 30mhz ` ` ` R 20db R 20db ` ` 2 fk2125t207al rohs 200mhz 40mhz ` ` ` R 20db R 20db ` ` fk2125t407al rohs 400mhz 80mhz ` ` ` ` ` R 20db R 20db ordering code ehs ( environmental hazardous substances ) impedance (terminal1-3) 100mhz capacitance (terminal1-2) 1mhz dc resistance max. rated vol t age rated curr ent insulation resi stance fk2125tz700c170 rohs 70 ? 30% 17pf 20% 2 10v dc 100 m a dc R 30m fk2125tz700c500 rohs 70 ? 30% 50pf 20% fk2125tz700c850 rohs 70 ? 30% 85pf 20% fk2125tz101c170 rohs 100 ? 30% 17pf 20% fk2125tz101c500 rohs 100 ? 30% 50pf 20% fk2125tz101c850 rohs 100 ? 30% 85pf 20% fk2125tz201c850 rohs 200 ? 30% 85pf 20% tz series ? nominal impedance 100mhz z700 70 z101 100 z201 200 ? nominal capacitance 1mhz c170 17pf c500 50pf c850 85pf f k 2 1 2 5 t z 2 0 1 c 8 5 0 t ? ? ? ? ? ? ? ? type fk multilayer emi sup p ression fil t er ? external dimensions (l w) mm 2 1 25 0805 2 . 0 1.25 reflow operating temperature range ? 25 85
emi filters (3 terminals) 177 emi?lter01_e-01 electrical characteristics this catalog contains the typical speci?cation only due to the limitation of space. when you consider the purchase of our products, please check our speci?cation. for details of each product (characteristics graph, reliability information, precautions for use, and so on), see our web site (http://www.ty-top.com/) or cd catalogs. t series tz series
emifl01_reli-pr1 emi?l01_reli_e-01 packaging this catalog contains the typical speci?cation only due to the limitation of space. when you consider the purchase of our products, please check our speci?cation. for details of each product (characteristics graph, reliability information, precautions for use, and so on), see our web site (http://www.ty-top.com/) or cd catalogs. minimum quantity type thickness [mm] standard quantity [pcs] embo ssed tape fk 21 2 5 (0805) 1.0 3 0 00 (0.039) tape material top tape strength the top tape requires a peel;-off force of 0.1 0.7n in the direction of the arrow as illustrated below. taping dimensions ? taped package ? embo ssed tape 8mm wide (0.031 inches wide) unit : mm inch type chip cavity insertion pitch tape t hickness a b f k t fk 212 5 08 0 5 1.5 0.2 2.3 0.2 4.0 0.1 2.0 max. 0.3 m a x. 0.059 0.008 0.091 0.008 0.157 0.004 0.079 max. 0.012 max. unit : mm inch leader and blank portion reel size unit : mm inch
emifl01_reli-pr2 emi?l01_reli_e-01 reliability data multilayer emi suppression filter this catalog contains the typical speci?cation only due to the limitation of space. when you consider the purchase of our products, please check our speci?cation. for details of each product (characteristics graph, reliability information, precautions for use, and so on), see our web site (http://www.ty-top.com/) or cd catalogs. 1. operating temperature range speci?ed ` 25 85 2. storage temperature range speci?ed ` 25 85 3. rated voltage speci?ed 10v dc 4. rated current speci?ed 100ma dc 5. cutoff frequency (t series) speci?ed 18mhz 3.6mhz, 25m h z 5mhz, 40mhz 10mhz, 100mhz 20mhz, 160mhz 30mhz, 200 m hz 40mhz, 400mhz 80mhz test methods and remarks me a suring equ i pment : hp8753d (or its equivalent) measuring sou r ce : 0dbm input-output imp e dance : 50 6. impedance (tz series) speci?ed 70 ? 30%, 100 ? 3 0%, 200 ? 30% test methods and remarks me a suring fre q uency : 100mhz measuring equ i pment : hp4291a (or its equivalent) measuring jig : hp16192a measuring sou r ce : ` 20dbm 7. capacitance (tz series) speci?ed 17pf 20%, 50pf 2 0%, 85pf 20% test methods and remarks me a suring equ i pment : hp4194a (or its equivalent) measuring vol t age : 0.5v measuring fre q uency : 1mhz capacitance mea s urement between terminals 1 and 2. 8. dc resistance speci?ed 2 max., 3 ma x. (fk2125t107al) test methods and remarks co n duct measurement between terminals 1 and 3. 9. insulation resistance speci?ed 30m min. tes t methods and remarks co n duct measurement between terminals 1 and 2. ap p lied vol t age : 10vdc 11. solderability speci?ed at least 75% of terminal electrode is covered by new solder. test m ethods and remarks so l der temperature : 230 5 du r ation : 4 1 se c . preheating tem p erature : 150 to 180 preheating tim e : 2 to 3 min. flux : im m ersion into methanol solution with colophony for 3 to 5 sec. 12. resistance to soldering speci?ed no signi?cant abnormality in appearance. test m ethods and remarks so l der temperature : 260 5 du r ation : 10 0 . 5 sec. preheating tem p erature : 150 to 180 preheating tim e : 2 to 3 min. flux : im m ersion into methanol solution with colophony for 3 to 5 sec. 13. thermal shock speci?ed no mechanical damage. ins u lation resistance (between 1 and 2) : 20m mi n . dc resistance (between 1 and 3) : 2 ma x . 3 max . ( fk2125t107al) test methods and remarks co n ditions for 1 c y cle step1 : minimum operating temperature 0 3 : 30 3 min step2 : room temperature : 2 to 3 m i n step3 : maximum operating temperature 3 0 : 30 3 min step4 : room temperature : 2 to 3 m i n number of cycles : 5 rec overy : 2 t o 3 h rs of recovery under the standard condition after the test. 10. resistance to flexure of substrate speci?ed no mechanical damage. test m ethods and remarks wa r p : 2mm te s ting board : glass epoxy-resin substrate th i ckness : 0 . 8mm
emifl01_reli-pr3 emi?l01_reli_e-01 multilayer emi suppression filter this catalog contains the typical speci?cation only due to the limitation of space. when you consider the purchase of our products, please check our speci?cation. for details of each product (characteristics graph, reliability information, precautions for use, and so on), see our web site (http://www.ty-top.com/) or cd catalogs. reliability data 14. damp heat steady state speci?ed no mechanical damage. ins u lation resistance (between 1 and 2) : 20m mi n . dc resistance (between 1 and 3) : 2 ma x . 3 max . ( fk2125t107al) test methods and remarks te m perature : 4 0 2 humidity : 90 to 95 rh d u ration : 500 12 hr s recovery : 2 t o 3 h rs of recovery under the standard condition after the removal from test chamber. 15. loading under damp heat speci?ed no mechanical damage. ins u lation resistance (between 1 and 2) : 20m mi n . dc resistance (between 1 and 3) : 2 ma x . 3 max . ( fk2125t107al) test methods and remarks te m perature : 4 0 2 humidity : 90 to 95 rh a p plied voltage : rated voltage (between 1 and 2) ap p lied current : rated current (between 1 and 3) du r ation : 500 12 hr s recovery : 2 t o 3 h rs of recovery under the standard condition after the removal from test chamber. 16. loading at high temperature speci?ed no mechanical damage. ins u lation resistance (between 1 and 2) : 20m mi n . dc resistance (between 1 and 3) : 2 ma x . 3 max . ( fk2125t107al) test methods and remarks te m perature : 8 5 2 applied voltage : rated voltage (between 1 and 2) ap p lied current : rated current (between 1 and 3) du r ation : 500 12 hr s recovery : 2 t o 3 h rs of recovery under the standard condition after the removal from test chamber. note on standard condition : "standard cond ition" referred to herein is de?ned as follows : 5 to 35 of te mperature, 45 to 85% relative humidity and 86 to 106kpa of air pressure. when there are questions concerning measurement results in or der to provide correlation data, the test shall be conducted under condition of 20 2 of te mperature, 60 to 70% relative humidity and 86 to 106kpa of air pressure. unl ess otherwise speci?ed, all the tests are conducted under the "standard condition." circ uit diagram since neither 1 nor 3 is directional, either could be served as the in terminal.
|
